SERA-2

88.09900.0V002 Z60 ESG IK09


SERA-2

Top / side-mounted luminaire Sera-2
Luminaire body made of die-cast aluminum
Outreach from mast axis to luminaire tip 650 mm
Luminaire cover made of toughened safety glass (IK09), printed
Angle of inclination for side mounting 0°/-15° in 5° increments
Angle of inclination for top mounting 0°/+15° in 5° increments
Spigot ø 60 mm (Assembly on site)
Selection of optics:
- Light distribution: ASY10 asymmetrical
(developed for the standard-compliant illumination of roads, paths
and squares in accordance with DIN-EN 13201)
- Light distribution: ASY11 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY12 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY13 asymmetrical wide
(Characteristic: for main and residential road illumination)
- Light distribution: ASY14 asymmetric narrow distribution
(Characteristic: for the illumination of storage areas)
- Light distribution: ASY17 asymmetrical, ultra wide distribution
(Characteristic: for large-area emergency lighting)
- Light distribution: ASY26 asymmetrical, optimized for luminance
(Characteristic: for main road illumination)
- Light distribution: ASY27 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY28 asymmetrical, optimized for uniformity
(Characteristic: for lighting main roads and residential streets)
- Light distribution: ASY30 asymmetrical, optimized for luminance
(Characteristic: for main road illumination)
- Light distribution: ASY32 asymmetric extra narrow distribution
(Characteristic: for e.g. parking space illumination)
- Light distribution: ASY33 asymmetrical, optimized for illuminance
(Characteristic: for illumination of main roads and residential streets)
- Light distribution: ASY34 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY35 asymmetrical, extra wide distribution
(Characteristic: for illumination of main roads and residential streets)
- Light distribution: PC02L asymmetric left-beam distribution
(Characteristic: for illumination of pedestrian crossings, with
left-hand traffic) (C14896)
- Light distribution: PC02R asymmetrical right-oriented
(Characteristic: for pedestrian crossing illumination)
Selection of fittings:
- With LED fitting 16 LED 200-700mA, power 11-34W
- With LED fitting 32 LED 200-700mA, power 20-66W
- With LED fitting 48 LED 200-500mA, power 29-70W
Selection of light colours:
- Light colour: 2200K
- Light colour: 2700K
- Light colour: 3000K
- Light colour: 4000K
- Light colour: 1700K generated by amber optics
- Light colour: 1900K generated by amber optics
- Light colour: 2000K generated by amber optics
With electronic ballast (220-240V/50-60Hz)
Selection of possible dimming/control:
- Without dimming
- With dimming via Dali
- With dimming via StepDim (control phase)
- With dimming via AstroDim
- With Zhaga Socket top, open source (D4i)
- With Zhaga Socket bottom, open source (D4i)
- With Zhaga Socket top and bottom, open source (D4i)
- With Zhaga Socket top, City Touch (D4i)
- With Zhaga Socket bottom, City Touch (D4i)
- With Zhaga Socket top and bottom, City Touch (D4i)
Selection with or without constant luminous flux:
- with CLO (constant luminous flux)
(corresponds to output mA and W -10%)
- without CLO (constant luminous flux)
Cable selection (specify in 1000 mm steps):
- Without pre-wiring
- Cable: 5G x 1.5 mm² - Length: 3000 mm – 15000 mm
Ingress protection IP66
Selection of protection class:
- Protection class I
- Protection class II
Selection of colour:
- Colour standard: DB 703 (similar to Gris 2900 sablé)
- Colour: different RAL (classic solid colours),
Hess DB and Hess Glimmer colours (to be specified).
- Any other colours available on request.
Optionally available with special coating:
- Sea-air resistant coating for medium requirements (C5)
- Sea-air resistant coating for high, extreme requirements (CX)
(this requires precise testing in advance)


Technical specifications

Ingress protection
IP66
Safety class
I , II
ULOR
0%
IK-Value
IK09
Width [mm]
262
Spigot ø in [mm]
60
LED Lifetime
L90 B10 / 100.000h - TA <=25° C
Rated input power
11 W , 13 W , 16 W , 18 W , 20 W , 23 W , 25 W , 27 W , 29 W , 32 W , 34 W , 30 W , 39 W , 43 W , 48 W , 52 W , 57 W , 61 W , 66 W , 36 W , 50 W , 64 W , 70 W
Height [mm]
104
Length [mm]
717

Drawing


Downloads

General

Lighting

LDT file

Planning

Graphic with dimensions

Accessories

Mounting Shape Height above ground [mm] Spigot ø in [mm]
99.21000.1V003
Tapered poles with embedded base
ES 3,0 1RT
Continuous embedded base conical 4500 76
99.21000.1V002
Tapered poles with embedded base
ES 3,0 1RT
Continuous embedded base conical 4000 76
99.21000.1V004
Tapered poles with embedded base
ES 3,0 1RT
Continuous embedded base conical 5000 76
99.21000.1V005
Tapered poles with embedded base
ES 3,0 1RT
Continuous embedded base conical 6000 76
99.21000.1V007
Tapered poles with embedded base
ES 4,0 1RT
Continuous embedded base conical 8000 76
99.21000.1V006
Tapered poles with embedded base
ES 3,0 1RT
Continuous embedded base conical 8000 76
99.21001.1V002
Konische Maste mit Flanschplatte
ES 3,0 1RT
Square flange plate conical 4000 76
99.21001.1V003
Konische Maste mit Flanschplatte
ES 3,0 1RT
Square flange plate conical 4500 76
99.21001.1V004
Konische Maste mit Flanschplatte
ES 3,0 1RT
Square flange plate conical 5000 76
99.21001.1V005
Konische Maste mit Flanschplatte
ES 3,0 1RT
Square flange plate conical 6000 76
99.21001.1V006
Konische Maste mit Flanschplatte
ES 3,0 1RT
Square flange plate conical 8000 76
99.21001.1V007
Konische Maste mit Flanschplatte
ES 4,0 1RT
Square flange plate conical 8000 76

The PDF datasheet contains your selected accessories.

Loading...