TOLEDO 660

88.01200.0V001 TOP Z76 PC IK10

Domed luminaire canopy, horizontally separated in two, made of aluminium, underside painted white. Support elements made of aluminium. Cylindrical luminaire enclosure made of PC. Round luminaire body made of aluminium, optionally with or without louvres. Light colour: 1700K / 1900K / 2000K / 2200K / 2700K / 3000K / 4000K. Protection rating I or II.

TOLEDO 660

Surface-mounted luminaire TOLEDO 660
For TOP mounting on wall/ pole brackets or pole tops
Cast aluminium housing
Lampshade ø 660 mm, inside painted white
Polycarbonate glass (IK10)
Spigot ø 76.1 mm
Without slats
Selection of optics:
- Light distribution: ASY10 asymmetrical
(developed for the standard-compliant illumination of roads, paths
and squares in accordance with DIN-EN 13201)
- Light distribution: ASY11 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY12 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY13 asymmetrical wide
(Characteristic: for main and residential road illumination)
- Light distribution: ASY14 asymmetric narrow distribution
(Characteristic: for the illumination of storage areas)
- Light distribution: ASY17 asymmetrical, ultra wide distribution
(Characteristic: for large-area emergency lighting)
- Light distribution: ASY27 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY28 asymmetrical, optimized for uniformity
(Characteristic: for lighting main roads and residential streets)
- Light distribution: ASY30 asymmetrical, optimized for luminance
(Characteristic: for main road illumination)
- Light distribution: ASY32 asymmetric extra narrow distribution
(Characteristic: for e.g. parking space illumination)
- Light distribution: ASY33 asymmetrical, optimized for illuminance
(Characteristic: for illumination of main roads and residential streets)
- Light distribution: ASY34 asymmetrical, optimized for illuminance
(Characteristic: for main road illumination)
- Light distribution: ASY35 asymmetrical, extra wide distribution
(Characteristic: for illumination of main roads and residential streets)
- Light distribution: CIR06 rotationally symmetrical, extra wide square
(Characteristic: for illumination of paths)
- Light distribution: M4 rotationally symmetrical, square
(Characteristic: for illumination of paths)
- Light distribution: M5 rotationally symmetrical, wide square
(Characteristic: for illumination of paths)
- Light distribution: M6 rotationally symmetrical, extra wide square
(Characteristic: for illumination of paths)
- Light distribution: M7 axially symmetrical, extra wide beam
(Characteristic: for main road or pedestrian zone illumination)
- Light distribution: M8 rotationally symmetric
(Characteristic: for place illumination)
- Light distribution: SYM02 axially symmetric wide
(Characteristic: for illumination of paths)
With LED fitting 16 LED 200-700mA, power 11-34W
Selection of light colours:
- Light colour: 2200K
- Light colour: 2700K
- Light colour: 3000K
- Light colour: 4000K
- Light colour: 1700K generated by amber optics
- Light colour: 1900K generated by amber optics
- Light colour: 2000K generated by amber optics
With electronic ballast (220-240V/50-60Hz)
Selection of possible dimming/control:
- With dimming via Dali
- With dimming via StepDim (control phase)
- With dimming via AstroDim
Selection with or without constant luminous flux:
- with CLO (constant luminous flux)
(corresponds to output mA and W -10%)
- without CLO (constant luminous flux)
Cable: 5G x 1.5 mm² - Length: 5000 mm
Ingress protection IP65
Selection of protection class:
- Protection class I
- Protection class II
Selection of colour:
- Colour standard: DB 703 (similar to Gris 2900 sablé)
- Colour: (please specify a different colour)
Optionally available with special coating:
- Sea-air resistant coating for medium requirements (C5)
- Sea-air resistant coating for high, extreme requirements (CX)
(this requires precise testing in advance)

Technical specifications

Ingress protection
IP65
Variant
Without external louvers
Safety class
I , II
IK-Value
IK10
Spigot ø in [mm]
76,1
Rated input power
11 W , 13 W , 16 W , 18 W , 20 W , 23 W , 25 W , 27 W , 29 W , 32 W , 34 W
Height [mm]
600
Area exposed to wind
0,04 m²

Downloads

General

Installation instructions

Lighting

LDT file

Planning

3D DWG

Accessories

Bracket Length [mm] Bracket MH [mm] Spigot ø in [mm]
10.31201.2V001
AUSLEGER
PARALLEL ROHRE 		900 twin 0 76,1
Bracket Length [mm] Bracket MH [mm] Spigot ø in [mm]
10.41210.0V001
WANDARM
PARALLEL ROHRE 		630 single 0 76,1
Width [mm] Height [mm]
99.00409.0V010
DIFFUSOR
FÜR 2BOARDS LEVO3/PC SATINIERT (12/15/20/28W) 		50 12
99.00125.0V002
ABSCHATTER
F. ALLE LED-BESTÜCKUNGEN/RING + MINIREFLEKTOR
Variant Mounting Shape Height above ground [mm] Spigot ø in [mm]
99.21000.0V001
Zylindrisch abgesetzter Mast mit Erdstück 3500 mm
ES 2,9/3,2 1RT 		Single stepped Continuous embedded base cylindrical 3500 76
99.21000.0V002
Zylindrisch abgesetzter Mast mit Erdstück 4000 mm
ES 2,9/3,2 1RT 		Single stepped Continuous embedded base cylindrical 4000 76
99.21000.0V003
Zylindrisch abgesetzter Mast mit Erdstück 4500 mm
ES 2,9/3,2 1RT 		Single stepped Continuous embedded base cylindrical 4500 76
99.21000.0V004
Zylindrisch abgesetzter Mast mit Erdstück 5000 mm
ES 2,9/3,2 1RT 		Single stepped Continuous embedded base cylindrical 5000 76
99.21001.0V001
Zylindrisch abgesetzter Mast mit Flanschplatte 3500 mm
ES 2,9/3,2 1RT 		Single stepped Square flange plate cylindrical 3500 76
99.21001.0V002
Zylindrisch abgesetzter Mast mit Flanschplatte 4000 mm
ES 2,9/3,2 1RT 		Single stepped Square flange plate cylindrical 4000 76
99.21001.0V003
Zylindrisch abgesetzter Mast mit Flanschplatte 4500 mm
ES 2,9/3,2 1RT 		Single stepped Square flange plate cylindrical 4500 76
99.21001.0V004
Zylindrisch abgesetzter Mast mit Flanschplatte 5000 mm
ES 2,9/3,2 1RT 		Single stepped Square flange plate cylindrical 5000 76

The PDF datasheet contains your selected accessories.