Select your desired model variant
Frame made of cast aluminium. Seat and backrest made of weatherproof, high-pressure impregnated ash wood, also available without backrest. Kambala and Robinia on request.
CORVUS - Your configuration
Bench CORVUS with back
- Bench CORVUS with back
- Sides of cast aluminium
- With 4 mounting plates
- (Mounting material provided by others)
- Sitting surface and backs of weather resistant,
- High-pressure impregnated ash wood
- Length: 2000 mm
- Colour: DB 703
- ** Origin of wooden panels from PEFC-certified woods **
|Drawings||Corvus_Bank_mit_Lehne_SM.png (PNG, 11.32 KB)|
|Catalogue page||Info-Sheet_Types of wood.pdf (PDF, 609.12 KB)|
CORVUS BENCH WITH BACKREST
Article Number 70.00600.1 ASH
Bench with backrest. Construction consists of two side members and two cross members. Seat and backrest are wood slats, which are bolted to the side members.
Total length is 2000 mm, total height is 825 mm, depth is 650 mm, seat height is 465 mm.
Weight: approx. 55 kg
Cast aluminium side members with 4 integral angle plates on their inward-facing sides for anchoring. (fastening hardware by others).
Cross members constructed from aluminium tubing bolt to bench sides.
Frame (cross and side members) finish:
All HESS-DB, Hess mica and RAL finishes are possible. Primer and top coat as per EN 12944-5. Applied with wet coating technique. Coat thickness is 140-160 my.
PEFC-certified, European ash backrest and seat.
Wood slats have 55 x 40 mm cross section, rounded edges and are sanded with fine sandpaper to achieve smooth surface.
Impregnated using vacuum tank pressure method to achieve weather-resistant surface protection.
Bolts and fastening hardware are stainless steel.