Wall mounted luminaire AVILA – Standing
Cylindrical luminaire, height approximately 790 mm. Surround by two-part design bracket (width 370 mm) made of aluminum, welded directly to the bottom of the luminaire. Luminaire cap made of die-cast aluminum (AlSi9Cu3), min. wall thickness 3 mm. Glass retaining ring made of die-cast aluminum AlSi12. Cylindrical luminaire glass, ø 300 mm, made of impact-resistant PMMA, minimum wall thickness 4 mm, partially satinized (approximately 120 mm). Overhead lighting unit with exchangeable LED module. Electric can be rotated in 90° steps by 360°. Wall-bracket made of galvanised steel, overhanging 1000 mm to center of luminaire. Connection: 5 x 1,0mm², 1000 mm pre-wired out of bracket. Particularly easy to maintain through maintenance concept: Luminaire housing to open with just one tool. Removal and access to the complete electrical unit from above. Screws and connecting parts made of stainless steel.
Ingress protection IP65. IK-code 06. Wind catching surface 0,31 m². ULOR 1,7%.
Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.
Equipment: LED-module and EB, dimmable. Exchangeable, rectangular aluminium core printed circuit boards for optimal thermal management with high-power LEDs mounted in grid-like manner and fastened via 2 screws and holders per board. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. Optics made from PMMA ensure a homogeneous light distribution. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings. Integrated, electronically controlled temperature monitoring.
L80 B10 / 100.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- And / or with CLM (to be specified in the order)
Optic O3, asymmetrical, optimised for illuminance, for main road illumination. Rated input power approx. 53 W without CLM – with CLM start 37 W, end 53 W. 4000 K. CRI min. 70. Protection rating II. Technical changes reserved.