Catenary suspended luminaire RESIDENZA
Cylindrical luminaire body with LED module, height until start of suspension approx. 471 mm. Height of suspension approx. 120 mm, overhang approx. 418 mm. Suspension, 1.4305 (V2A), including distribution box and with cable clamp, 1.4305 (V2A), each with two M8X25 cylinder screws for on-site steel cable (ø 6 or 8 mm). Fixing by means of ball head principle to luminaire housing. Luminaire housing made of cast aluminum, ALMGSI 1, ø 200 mm, with central circumferential ring, height 90 mm, ALMGSI 0,5, ø 300 mm, fixed by four M5X12 to luminaire housing. Cylindrical luminaire glass, ø 200 mm, made of impact-resistant polyacrylic glass (PMMA) min. 3 mm wall thickness, height approx. 236 mm. Overhead lighting unit with exchangeable LED module. Internal design lamination with 5 rings made from one part, AlMg 3, above LED module. Particularly maintenance-friendly thanks to maintenance concept: Luminaire glass can be opened without tools through a bayonet lock.
Steel cable 2,0 mm x 500 mm with eyelet and carabiner as mechanical fall arrester. Screws and connectors made out of stainless steel. Ingress protection IP65. Wind catching surface 0,12 m².
Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.
Equipment: LED-module and EB, dimmable. LED-module consisting of square aluminium core with 25 high-power-LEDs mounted in grid-like manner. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. PMMA optics for homogeneous and focused light distribution. Efficient heat management by means of a thermal conductive pad, GEL G3, on the underside. Simple complete exchange with 4 screws. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings.
L80 B10 / 85.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- And / or with CLM (to be specified in the order)
Rotationally symmetric light distribution of 360 degrees for even illumination of squares and inner city areas. Rated input power approx. 30 W without CLM – with CLM start 20 W, end 30 W. 3000 K. CRI min. 85. Protection rating I. Technical changes reserved.