Catenary suspended luminaire CANTO UE 550-2
Luminaire housing made of high quality cast aluminum, oval. Length 550 mm, width 365 mm, total height 320 mm. Glass-cover of toughened safety-glass (ESG). Suspension made of stainless steel. Stainless steel cable on site. Maximum installation and service friendliness through:
- Glass cover hinged
- All electrical components combined on a light / electric unit
- Electrical unit with safety plug pluggable
- By removing four screws complete light / electrical unit removable
Ingress protection IP65. IK-Code IK08. Wind catching surface 0,1 m². ULOR 2,3%.
Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.
Equipment: LED-module and EB, dimmable. Exchangeable, rectangular aluminium core printed circuit boards for optimal thermal management with high-power LEDs mounted in grid-like manner and fastened via 2 screws and holders per board. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. Optics made from PMMA ensure a homogeneous light distribution. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings. Integrated, electronically controlled temperature monitoring.
L80 B10 / 100.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- And / or with CLM (to be specified in the order)
Optic O9, double asymmetrical, for main road illumination. Rated input power approx. 53 W without CLM – with CLM start 37 W, end 53 W. 3000 K. CRI min. 70. Protection rating II. Technical changes reserved.