Top mounted luminaire
Cylindrical top mounted luminaire with luminaire cover. Lampshade ø 600 mm, height 490 mm, plain coloured. The rods made from stainless steel, unpainted. Luminaire roof mountable via bayonet lock. Luminaire housing made of aluminum cast. Luminaire bottom for adaptor for pole-fixation Ø 76,1 mm, other spigot with adaptor possible. Diffuser of shockproof PMMA. Screws and connecting parts made of stainless steel. Simple maintenance concept: Electrical unit easy and quick to replace completely via plug connection. Ingress protection IP54. IK-Wert 07. Wind catching surface 0,11 m². ULOR 2,5%.
Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.
Equipment: LED-module and EB, dimmable. Exchangeable, rectangular aluminium core printed circuit boards for optimal thermal management with high-power LEDs mounted in grid-like manner and fastened via 2 screws and holders per board. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. Optics made from PMMA ensure a homogeneous light distribution. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings. Integrated, electronically controlled temperature monitoring.
L80 B10 / 100.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- And / or with CLM (to be specified in the order)
Optic O3, asymmetrical, optimised for illuminance, for main road illumination. Rated input power approx. 15 W without CLM – with CLM start 15 W, end 20 W. 3000 K. CRI min. 70. Protection rating I. Technical changes reserved.