Top mounted luminaire CAMPONE
Conical top mounted luminaire, height approx. 810 mm. Luminaire body made of cast aluminum. Round luminaire roof made of aluminum. Conical luminaire glass, ø above about 395 mm, ø below about 190 mm, made of impact-resistant PMMA, min. 2 mm wall thickness, height 510 mm. Lighting unit sits on four aluminum rods, concealed by anodized design sheet internally. Luminaire prepared for on site pole spigot ø 76,1 mm, pre-wired with 5000 mm.
Particularly maintenance-friendly thanks to maintenance concept: Luminaire housing open and maintain without tooling. Screws and connectors made out of stainless steel.
Ingress protection IP65. IK-Code IK06. Wind catching surface 0,21 m². ULOR 2,5%.
Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.
Equipment: LED-module and EB, dimmable. Exchangeable, rectangular aluminium core printed circuit boards for optimal thermal management with high-power LEDs mounted in grid-like manner and fastened via 2 screws and holders per board. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. Optics made from PMMA ensure a homogeneous light distribution. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings. Integrated, electronically controlled temperature monitoring.
L80 B10 / 100.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- And / or with CLM (to be specified in the order)
Optic O3, asymmetrical, optimised for illuminance, for main road illumination. Rated input power approx. 28 W without CLM – with CLM start 20 W, end 28 W. 3000 K. CRI min. 70. Protection rating I. Technical changes reserved.