BARCELONA

Pole mounted luminaire with bracket BARCELONA 545 single
Bell-shaped luminaire shade made of high quality aluminum special alloy, bottom white coated with special paint, ø 545 mm. Luminaire curved glass made of impact-resistant PMMA, clear. Four stainless steel clips hold the luminaire cover in their position of use. Connection between luminaire and bracket through threaded bush made of stainless steel. Double-membrane seals as elastic sealing element for cable routing in the luminaire. Screws and connecting parts made of stainless steel.
Arched bracket made of steel, ø 60,3 mm, minimum wall thickness 3,2 mm, overhanging 710 mm until middle luminaire, fixing with two stainless steel screws (M10) on the pole. Pole made of steel, cylindrical stepped, LSH 4500 mm, minimum wall thickness 3,5 mm. Pole transition double welded. Embedded base with two openings for cable entry, inspection-door 300 x 100 mm, ground connection and C-rail for fuse-box. Pole lower part 1200 mm above ground, ø 114,3 mm. In the upper part of the pole two distance pieces of pipe are welded to fix the bracket.
Ingress protection IP54. Wind catching surface 0,7 m². ULOR 2,7%.
Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.
Equipment: LED-module and EB, dimmable. Exchangeable, rectangular aluminium core printed circuit boards for optimal thermal management with high-power LEDs mounted in grid-like manner and fastened via 2 screws and holders per board. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. Optics made from PMMA ensure a homogeneous light distribution. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings. Integrated, electronically controlled temperature monitoring.
LED-lifetime:
L80 B10 / 100.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- (to be specified in the order)
Optic O3, asymmetrical, optimised for illuminance, for main road illumination. Rated input power approx. 20 W without CLM. 3000 K. CRI min. 70. Protection rating I. Technical changes reserved.