RENO 3200 Illuminating columns
Select your desired model variant
Rectangular illuminating column made of high-quality aluminium extruded profiles with flange plate. Luminaire enclosure made of satin-finished single-pane safety glass. Luminaire and reflector installed in the upper part of the column. Light colour: 3000K/4000K. Protection rating I or II.
RENO LED - Your configuration
Light Column RENO 3200
10.07212.3200V002 2X HP LED 43W SKI (3000K)
- Light column RENO 3200
- Tempered safety glazing (ESG)
- Light exit front and back 1550 mm long
- Two light exits at the top 200 x 200 mm
- Elec. equip.: 2x HP LED
- Colour temperature: warm white (3000K)
- System power: approx. 43W
- With electronical ballast (700mA)
- Without dimming and without CLM (Constant Lumen Management)
- Ingress protection IP54, protection rating I
- Extruded aluminum profile
- Total height: 3200 mm
- With flange-plate 300 x 300 x 15 mm
- Hole distance 220 x 220 mm, hole ø 18,5 mm
- With inspection-door and C-rail for fuse-box
- Colour: DB 703
Wind catching surface 0,94 m²|
Ingress protection IP54
L80 B10 / 85.000h - TA <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
|Drawings||Reno_SL.png (PNG, 6.08 KB)|
RENO 3200 Illuminating Column
Article Number: 10.07211.3200
Rectangular housing constructed from high-grade extruded aluminium section with coated finish. Minimum material thickness is 4 mm. Dimensions: 3200 x 150 x 295 mm. Column base has a 300 x 300 mm flange plate, which is 15-mm thick and has 4 oblong holes for anchoring. Oblong hole is 22 x 42 mm and distance from hole to hole is 200 mm. Two 1550-mm long side translucent enclosures constructed from tempered single-pane safety glass provide diffused asymmetric effect lighting. Two other 200 x 200 mm translucent enclosures fabricated from tempered single-pane safety glass are located in the luminaire's upper section. Rotationally symmetric reflector made from high-temperature resistant, scratchproof anodised aluminium. All hardware is stainless steel. Luminaire comes pre-wired and has access hatch that with a triangular-headed locking mechanism. Includes earthing contact and c-channel for a junction box.
All electrical components and wiring are mounted on a single gear tray.
All electrical components are assembled on a single gear tray that removes with the loosening of 6 screws.
Maintenance: Easy access to lamp via four screws in the cover.
Weight: approx. 80 kg
Finish: All 2-component RAL and mica finishes with primer and topcoat are possible. The coating complies with the C 3 M long (high) category and has been tested and verified for compliance with DIN 55633 or ISO 12995-5. Luminaire housing is powder-coated white inside for optimum light distribution.
Ingress protection: IP 54
All rights reserved.
Lamp: 1 G12, HIT-CE 70 watt compensated source
All electrical components, including ballast with reversible thermal control, capacitor (PCB free) and ignitor, come assembled, wired, factory tested and ready to operate with VDE approval stickers. Electrical component assembly and wiring are compliant with (VDE 0711) DIN EN 60598.
Safety class I
Luminaire is configured for operation on 230-V 50 Hz constant alternating current voltage as per DIN IEC 38.
All rights reserved.
|3D data||Hess_3D_Reno.STEP (BIN, 71.62 KB)|
Hess_3D_Reno.dwg (BIN, 35.91 KB)