Select your desired model variant
Luminaire enclosure made of PMMA, frosted. With flange plate. Protection rating I.
VIGO QG: Square bollard made of aluminium, bollard base straight.
VIGO QG - Your configuration
Illuminating bollard VIGO QG 1000
19.06830.0V005 1X LED E27
- Illuminating bollard VIGO QG 1000
- Column constructed of square aluminium tubing, straight ending
- Diffuser of shockproof PMMA, frosted
- Elec. equip.: 1xE27 socket for LED lamp (220-240V/50-60Hz)
- Without lamp (Type PAR30S, max. 15W)
- With flange-plate 250 x 250 x 12 mm
- With inspection-door for one or two cables max. 5 x 10 mm² cross section
- With one 2A microfuse
- Ingress protection IP54, protection rating I
- Colour: DB 703
Wind catching surface 0,18 m²|
Ingress protection IP54
|Drawings||Vigo_Q_1000_SL.png (PNG, 1.93 KB)|
VIGO QG Illuminating Bollard Square illuminating bollard with symmetric optics. Clever construction and superior materials illuminate the need for visible rods on the outer corners to provided structural strength. Total height is 1000 mm. Base constructed from 130-mm square aluminium channel with 3-mm thickness, round corner bend of at least 5 mm and straight cut top. 250 x 250 mm square flange plate constructed from 12-mm material. Access hatch comes with triangular key lock. Bollard includes chassis terminal for earthing and c-channel to accommodate junction box. Stainless steel hardware. Weight is 12 kg. 120-mm, square enclosure constructed from 3-mm thick high impact resistant translucent PMMA provides homogenous lighting. Reflector is manufactured from high grade, anodised aluminium and is scratch and high temperature resistant, and exceptionally durable. Compact control gear assembly with watertight electrical connector mounts in lower section of the luminaire housing and removes easily. Maintenance is via access hatch, eliminating the need for visible hardware on the luminaire's exterior. Finish: All two-component (primer and topcoat) RAL and mica finishes. Ingress protection IP 65 Subject to technical changes. Electrical configuration for TC-TEL 32 W lamp with XXXXX socket All electrical components, including ballast with reversible thermal control, capacitor (PCB free) and ignitor, come assembled, wired, factory tested and ready to operate with VDE approval stickers. Electrical component assembly and wiring are compliant with (VDE 0711) DIN EN 60598. Luminaire is configured for operation on 230-V constant alternating current voltage and per DIN IEC 38. Safety class I.
|3D data||Hess_3D_Vigo_G_1000.STEP (BIN, 34.77 KB)|
Hess_3D_Vigo_G_1000.dwg (BIN, 29.34 KB)