Select your desired model variant
Frame and container made of steel, galvanised. Disposal opening reduced in size. Container can be tipped forward for emptying. Triangular lock. Insert made of PE plastic or metal. Also available with ashtray as optionally integrated or attached version. Available with flange, embedded base or wall attachment. Capacity: Punto 500 = 32 l, Punto 700 = 45 l
PUNTO 500 GROUND - Your configuration
Waste receptacle PUNTO 500
- Waste receptacle PUNTO 500
- Frame and container of galvanised steel
- Reduced opening
- Container can be tipped forward for emptying
- Triangular lock
- Light-weight liner of polyethylene PE (32l)
- With embedded base (Permanent version)
- Colour: DB 703
|Drawings||Punto_500_SM_FQ_ER.png (PNG, 11.18 KB)|
|Catalogue page||Hess_PUNTO_2018_EN.pdf (PDF, 1.6 MB)|
PUNTO 500 Waste Receptacle
Post has integral through embedded base.
To accommodate the container, comes with hinge block on the lower post section and lock body on the upper section, the latter fitted for a triangular key.
Also fit with a mount to accommodate a retention cable.
Integral container top with opening. Pitched post top cover.
Round container attaches to post via hinge at the bottom and lock at the top.
Tips to permit emptying and remains in emptying position via retention cable.
Removable polyethylene liner.
80 x 46 mm steel IPE I-beam post in 5.2/3.8-mm thickness. Below-grade length is 830 mm.
Embedded base length is 500 mm. 350-mm diameter cover is 8 mm thick, and has a 170-mm round opening.
Container, with 340-mm diameter and 500-mm depth, is constructed from 1.5-mm thick sheet steel, which is bent over to create lipped top and bottom edges.
Container has open top and perforated bottom.
PE liner has a diameter of 305 mm and is 475 mm deep with 3.5 thick walls and 32-l capacity.
Post comes as hot-dipped galvanised weldment.
Container is constructed from galvanised sheet steel.
Dimensions: Above-grade height is 830 mm, cross section measures 350 x 460 mm and length of embedded base is 500 mm.
Weight: approx. 25 kg
Finish: All RAL, HESS DB and mica finishes are possible and are applied with powder coating technique.
Subject to technical change.
Protected by aesthetic design patent.