Select your desired model variant
Die-cast aluminium luminaire housing. Pole top mounting with 0° or 5° tilt. (Livorno XL also accommodates side mounting). Clear single-pane safety glass enclosure with decorative masking. Choice of any RAL, Hess mica or Hess DB finish. For conventional light sources.
LIVORNO S LED RAP - Your configuration
Luminaire LIVORNO S RAP
10.14120.0V003 1XRAP 24W SKI (3000K)/S-MODUL
- Luminaire LIVORNO S RAP
- Constructed of aluminium
- Adaptor for pole ø 76,1 mm
- Light distribution: asymmetrical, S-module
- Elec. equip.: LED-1xRAP approx.24W(3000K)
- With electronical ballast(220-240V / 50-60Hz) - 350-500mA with CLM or 500mA without CLM
- Ingress protection IP66, protection rating I
- Following versions are available:
- Without dimming and without CLM (Luminous output degredation
- compensation) OR with dimming via DALI,StepDim or AstroDim
- AND/OR with CLM (to be specified on your purchase order!)
- Colour:RAL(classic-unicolour)/HESS-DB+Glimmer (to be specified) (Powder coated)
Wind catching surface 0,012 m²|
Ingress protection IP66
|Dim Module (optional)||
StepDIM (only for use with OPTOTRONIC control gear): The StepDIM unit operates via control lead (positive or negative logic). Luminaires are factory-set to dim to a single stage (30, 50 or 70 %). The control, which is integrated into the ballast, operates via an extra 230-V control lead.
AstroDIM (only for use with OPTOTRONIC control gear): AstroDIM has an infinite range from 10-100%. The customer can specify a maximum of two stages (standard are 40 and 80% or 30 and 70%), which Hess sets at the factory. The ballast includes an integral control (timer), which also determines the hypothetical midnight time. This dimming system is a stand-alone system and does not require an external control infrastructure.
DALI: The Optotronic driver comes with a DALI interface and easily integrates into any DALI-operated lighting system
DIMeasy: The DIMeasy module operates via control lead (positive or negative logic), or individual luminaires may be fit with timers. DIMeasy factory-sets to one of three dim levels: 30%, 50% or 70%. It also has different electrical switch packages (DIP switches), each of which contains individual switches that set to the desired dim level.