RAVENNA

Ravenna 220 G Symmetric LED In-ground Luminaire
12.33801.1
The luminaire housing shall be permanent mould cast, with cylindrical shape, a diameter of 220 mm, a length of 345 mm and wall thickness of 6 mm. It shall be cast from Anticorodal Ship special alloy aluminium and weigh 6.5 kg without the installation sleeve. The enclosure shall be constructed from 12-mm thick, clear single-pane tempered safety glass. The luminaire housing is also to be fitted with an interior pane manufactured from infrared-reflective glass. Maximum glass surface temperature must be 40° C. Glass enclosure shall be bonded to non-corroding V4A stainless steel edging. Outer diameter is 220 mm. All hardware shall be stainless steel and not visible on the exposed luminaire surface, providing a smooth uninterrupted sleek appearance. A thermally decoupled gear tray shall contain all electrical components and fasten via two screws for easy removal. Clips in the plastic tube provided for installation ease grade-flush installation for up to 1.5 metric tonne rollover capacity. All fastening components are manufactured from stainless steel. Luminaire comes pre-wired with 2-m long H07RN8-F 3G 1.5 mm² cable. Must come ready to install in installation sleeve provided by others (e.g. 200 m wide, 50-cm long plastic pipe). Tested and approved for compliance with DIN EN 60598-13.
Finish:
The housing shall be powder coated in and out with a double coat applied compliant with DIN EN 55633. It shall be 320-450µm thick with improved corrosion protection and have a RAL 7016 finish. Corrosion Protection Category C3.
Ingress protection IP 67
Subject to technical changes.