RENO 3200 Illuminating columns
Select your desired model variant
Single-pane tempered safety glass enclosure. Lamp and reflector mount in upper section of the luminaire housing. Housing constructed from high-quality extruded aluminium section. Choice of any RAL (classic-unifarb), Hess mica or Hess DB finish. Flange plate.
RENO - Your configuration
Light Column RENO 3200
10.07211.3200V002 HIT-CE 150W SKI
- Light column RENO 3200
- Tempered safety glazing (ESG)
- Elec. equip.: 1xG12, HIT-CE 150W
- Ingress protection IP54, protection rating I
- Without lamp
- Groved aluminium column
- Total height: 3200 mm
- With flange-plate 300 x 300 x 15 mm
- Hole distance 220 x 220 mm
- With inspection-door and C-rail for fuse-box
- Colour:RAL(classic-unicolour)/HESS-DB+Glimmer (to be specified)(Powder coated)
- Weight: approx.63 kgs
Wind catching surface 0,94 m²|
Ingress protection IP54
Rated input power [W] 170.0
Rated luminous flux [lm] 15000.0
Efficiency [lm/W] system 88.2
|Drawings||RENO.DXF.zip (ZIP, 15.23 KB)|
Reno_SL.png (PNG, 3.73 KB)
RENO 3200 Illuminating Column
Article Number: 10.07211.3200
Rectangular housing constructed from high-grade extruded aluminium section with coated finish. Minimum material thickness is 4 mm. Dimensions: 3200 x 150 x 295 mm. Column base has a 300 x 300 mm flange plate, which is 15-mm thick and has 4 oblong holes for anchoring. Oblong hole is 22 x 42 mm and distance from hole to hole is 200 mm. Two 1550-mm long side translucent enclosures constructed from tempered single-pane safety glass provide diffused asymmetric effect lighting. Two other 200 x 200 mm translucent enclosures fabricated from tempered single-pane safety glass are located in the luminaire's upper section. Rotationally symmetric reflector made from high-temperature resistant, scratchproof anodised aluminium. All hardware is stainless steel. Luminaire comes pre-wired and has access hatch that with a triangular-headed locking mechanism. Includes earthing contact and c-channel for a junction box.
All electrical components and wiring are mounted on a single gear tray.
All electrical components are assembled on a single gear tray that removes with the loosening of 6 screws.
Maintenance: Easy access to lamp via four screws in the cover.
Weight: approx. 80 kg
Finish: All 2-component RAL and mica finishes with primer and topcoat are possible. The coating complies with the C 3 M long (high) category and has been tested and verified for compliance with DIN 55633 or ISO 12995-5. Luminaire housing is powder-coated white inside for optimum light distribution.
Ingress protection: IP 54
All rights reserved.
Lamp: 1 G12, HIT-CE 70 watt compensated source
All electrical components, including ballast with reversible thermal control, capacitor (PCB free) and ignitor, come assembled, wired, factory tested and ready to operate with VDE approval stickers. Electrical component assembly and wiring are compliant with (VDE 0711) DIN EN 60598.
Safety class I
Luminaire is configured for operation on 230-V 50 Hz constant alternating current voltage as per DIN IEC 38.
All rights reserved.
|Photometric reports||REN0807A.GIF (GIF, 13.71 KB)|
REN0807A.ldt (BIN, 1.71 KB)
10.07211.3200V002.uld (BIN, 121 KB)
|3D data||Hess_3D_Reno.dwg (BIN, 35.91 KB)|
Hess_3D_Reno.STEP (BIN, 71.62 KB)